linux centos9 kangle 3.6.0源代码cmake编译官方教程 启用iouring网络模型

小樱

linux centos9 kangle 3.6.0源代码cmake编译官方教程 启用iouring网络模型

也可以参考我自己发的教程
https://bbs.itzmx.com/thread-109515-1-1.html

以下是官方教程
升级内核,因为要启用高性能的iouring(比epoll高很多),必须要升级linux内核

1. rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
   
2. yum install https://www.elrepo.org/elrepo-release-9.el9.elrepo.noarch.rpm
   
3. yum --enablerepo=elrepo-kernel install kernel-lt

复制代码

升级完后重起,uname -r 看是否成功(6.1以上).

安装依赖

1. yum -y install git gcc gcc-c++ zlib-devel sqlite-devel openssl-devel pcre-devel brotli-devel cmake

复制代码

安装liburing

1. wget https://github.com/axboe/liburing/archive/refs/tags/liburing-2.8.tar.gz
   
2. tar xzf liburing-2.8.tar.gz
   
3. cd liburing-liburing-2.8
   
4. ./configure
   
5. make
   
6. make install
   
7. echo "/usr/lib" > /etc/ld.so.conf.d/usr_lib.conf
   
8. cd ..

复制代码

安装jemalloc

1. yum -y install autoconf automake
   
2. wget https://github.com/jemalloc/jemalloc/archive/refs/tags/5.3.0.tar.gz -O jemalloc-5.3.0.tar.gz
   
3. tar xzf jemalloc-5.3.0.tar.gz
   
4. cd jemalloc-5.3.0
   
5. ./autogen.sh
   
6. make
   
7. make install
   
8. echo "/usr/local/lib" > /etc/ld.so.conf.d/usr_local_lib.conf
   
9. cd ..

复制代码

安装kangle,其中v3.6.0是发行版本,你可以选择最新稳定版本号替换.

1. git clone -b v3.6.0 https://gitee.com/keengo/kangle
   
2. cd kangle
   
3. git submodule init
   
4. git submodule update
   
5. mkdir build
   
6. cd build
   
7. cmake .. -DCMAKE_BUILD_TYPE=Release -DLINUX_IOURING=ON -DENABLE_BROTLI=1 -DENABLE_JEMALLOC=1 -DCMAKE_INSTALL_PREFIX=/vhs/kangle
   
8. make
   
9. make install
   
10. ldconfig

复制代码

运行

1. /vhs/kangle/bin/kangle -v

复制代码

看是否成功.

官方wiki的centos9编译教程
https://gitee.com/keengo/kangle/wikis/%E5%AE%89%E8%A3%85%E6%95%99%E7%A8%8B/centos%209%20%E5%AE%89%E8%A3%85kangle%E6%95%99%E7%A8%8B